Mercedes CR2 IMMO Emulator SPRINTER 2.2 CDI, 2.7 CDI ML 2.7 CDI 5-plugs
Mercedes CR2 IMMO Emulator SPRINTER 2.2 CDI, 2.7 CDI ML 2.7 CDI 5-plugs
MB CR2 IMMO EMULATOR
This is high quality NON-China, manufactured in EU MB Immo Emulator. Device can emulate good working immobilizer for MB cars with common rail system (EDC15 ecu) to unlock engine control unit. This tool can by useful for car tuning specialist, when new type motor are installed in old vehicle and you need disable original immobilizer function in engine ECU. Can replace defective immobilizer unit (very common problem in older cars) .
Supported cars:
SPRINTER 2.2, Cdi 2.7 Cdi, ML 2.7 Cdi 5-plugs
Recommended installing with specialist, since you need desolder ecu EEPROM, change contents with programmer and solder it back. (Fitting instructions included)
Mercedes CR2 Immo Emulator will not work if you just connect it to non-prepared ECU!
C O N N E C T I O N:
Only 4 wires: +12V (ignition), GND and CAN BUS-lines.
Disconnect original immo from can bus!
DEBUG LED: flash -> communication on CAN bus, continuous on -> engine ECU unlocked, off -> no engine ECU request.
| Weight | Weight: 10 g |